VIBRO-METER
Vibro-Meter MPC4 200-510-063-034 Machinery Protection Card
ordering informationVOGI
KEY FEATURES AND BENEFITS :
Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
Differential buffered (raw) transducer output per dynamic channel
DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs
Technical parameters
VOGI
Technical parameters
Processor: Multi-core architecture, supports real-time data processing and parallel computing, sampling rate ≥10kHz.
Input channels: 4/6 channels (depending on the version), supports accelerometer, displacement sensor and other signal inputs.
Communication interface: Ethernet, RS-232/485, CANopen, supports Modbus TCP/IP and OPC UA protocols.
Power supply requirements: DC 24V (±10%).
Power consumption ≤15W,
Operating temperature -20℃~+70℃
Dynamic signal output: 0-10V voltage or 4-20mA current signal.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
Functional features and principles:
VOGI
Multi-version support: MPC4 200-510-063-034 provides "standard version", "independent circuit version" and "safety version (SIL)", the latter is certified by IEC 61508 and ISO 13849, suitable for SIL 1/PL c Safety level scenarios.
Fault isolation: The safety version (SIL) cancels the VME interface to avoid configuration interference of non-safety modules and prevents misoperation through hardware isolation.
Real-time monitoring and alarm: MPC4 200-510-063-034 identifies fault modes such as bearing wear and shaft misalignment through FFT spectrum analysis.